AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Svat camera system making noise9/16/2023 ![]() ![]() But for now, these 2MP cams keep a pretty good eye on things - and it's been quite reliable for many years. ![]() Not terrible, but not real cheap - given the cost of newer NVR's w/ better cameras and features. The estimated fan cost was $30, and a new P/S with the fan would cost about $100. Tomorrow I'll put it all away again and hopefully I'll be good for another 4-5 years. Thus far - 3+ hours - it's acting like new So now I have it all reassembled and closed up (testing it) before I install it back into the cabinet. Same for the larger fan in my cabinet that the NVR lives in. I did a thorough cleaning of the interior of the "box" and ditto for the power supply enclosure and fan blades. I'm now of the impression that what was happening which caused my NVR to heat up (around the pwr supply) was that the fan was running slowly. Not that it isn't used in many NVRs - but in looking up the P/N it wasn't the run of the mill part (IMO). The fan is not a real common fan from what I could see. The power wires for the actual fan are potted twice, and there's no obvious connector as there were for the connections from the power supply to the two primary boards in the NVR. If you hear a suspicious noise or are curious to see what is happening outside, you can simply. Got that done, and found I had to remove the board at the bottom of the enclosure in order to remove the fan. COMPLETE SYSTEM Instruction Manual Model VIS300-7M2 SVAT ELECTRONICS. And then I needed an extra hand in getting the power supply opened. I was able to remove the cover and also the power supply with enclosed cooling fan. This door strike will make a slight clicking noise when the unlock button is pressed, which lets visitors know they can enter. I disconnected all the cams / PIR power wires and other attachments and removed my NVR from the cabinet. I'm simply wanting to replace the original fan for an equivalent fan. Can one of you please suggest a replacement fan? I don't wish to change the configuration of my POE switch or the Pwr supply as some have done. I plan to open the case this weekend and have a look at the fan which I believe will be mounted directly above the pwr supply. I told them that I wasn't in need of a new NVR, but simply a single fan. I called Swann and they only offered for me to replace the NVR or send for repairs. I felt the case in the area of the rear-mounted air vent on the back of the NVR and the localized materials were quite hot. I noticed a "hot" scent when I got up the other morning in the proximity to my NVR (which is in a vented cabinet). You can change the door bell chime easily to coincide with any occasion by pressing the button on the side of the monitor.Okay, I'm now fairly confident that the issue I need to solve is the cooling fan for the POE power supply. ![]() The VIS300-7M2 features a variety of standard chimes as well as different melodies for holidays, patriotic events and special occasions. You'll always have a clear view of your entrance with the VIS300-7M2. They activate automatically when it gets dark and deactivate during the day to save energy (CDS sensor). The outdoor camera is equipped with advanced night vision and six infrared (IR) LEDs let you see clearly in the dark, up to 8ft away. The included camera mounts also give you a nice angled view of anyone standing at your door. When you hear a suspicious noise or are curious to see what is happening outside, you can simply press the view button and instantly monitor your entranceway. This feature can put you at ease when you or your children feel uncomfortable being home alone or talking to visitors. The video, audio and power all run through two wires, so no additional or complicated wiring is necessary.Įnjoy the freedom of being able to safely monitor your entrance and carry on conversations without ever having to open the door to strangers. It can work with your existing door bell wiring, so you can do everything yourself within minutes (50ft cable included). SVAT's 300-Series video intercom system is incredibly easy to set up and use. Mounting the camera and monitor is easy and effective due to the included angled mounts and built-in stand-you can set it up in minutes! Always be aware of what is happening at your business or home entranceway with the night vision camera that allows you to see in the dark, up to 8ft away. The VIS300-7M2 is an effective and simple addition to your existing security system and gives you an extra eye when protecting your property. Hands free operation allows you to see and hear who is at your entrance before deciding whether or not you want to answer. The convenient, compact system uses both video and audio to alert you when someone comes to your door. ![]() It can make you feel secure when you or your children have to open the door for strangers. SVAT's video intercom, VIS300-7M2, is a hands free 2-wire indoor/outdoor color video intercom system. ![]()
0 Comments
Read More
Leave a Reply. |